Project

# Title Team Members TA Documents Sponsor
28 Medical Training Simulation Interface
Area Award: Education
 Nicholas Cialdella
Thomas Shiou
 design_document0.document
final_paper0.document
presentation0.ppt
proposal0.pdf
Currently, clinical simulators (full-body, robotic electromechanical devices) rely on computer-based input through a laptop computer. The computer interface is a complex series of screen-based inputs that are typically handled through keystrokes and the use of a mouse. The goal of this project will be to design and create a new more efficient interface for the Laerdal simulators for medical training with Jump Trading Simulation & Education Center. Currently commands are performed through a series of keystrokes and mouse actions. Along with the keyboard and mouse, the simulator operator will also have a set of dials and a capacitive touch screen to select modes and make adjustments to the simulation. The additional hardware will communicate with the existing Laerdal software through USB.

Control System and User Interface for Hydraulic Bike

Iain Brearton

Featured Project

Parker-Hannifin, a fluid power systems company, hosts an annual competition for the design of a chainless bicycle. A MechSE senior design team of mechanical engineers have created a hydraulic circuit with electromechanical valves, but need a control system, user interface, and electrical power for their system. The user would be able to choose between several operating modes (fluid paths), listed at the end.

My solution to this problem is a custom-designed control system and user interface. Based on sensor feedback and user inputs, the system would change operating modes (fluid paths). Additionally, the system could be improved to suggest the best operating mode by implementing a PI or PID controller. The system would not change modes without user interaction due to safety - previous years' bicycles have gone faster than 20mph.

Previous approaches to this problem have usually not included an electrical engineer. As a result, several teams have historically used commercially-available systems such as Parker's IQAN system (link below) or discrete logic due to a lack of technical knowledge (link below). Apart from these two examples, very little public documentation exists on the electrical control systems used by previous competitors, but I believe that designing a control system and user interface from scratch will be a unique and new approach to controlling the hydraulic system.

I am aiming for a 1-person team as there are 6 MechSE counterparts. I emailed Professor Carney on 10/3/14 and he thought the general concept was acceptable.

Operating modes, simplified:

Direct drive (rider's pedaling power goes directly to hydraulic motor)

Coasting (no power input, motor input and output "shorted")

Charge accumulators (store energy in expanding rubber balloons)

Discharge accumulators (use stored energy to supply power to motor)

Regenerative braking (use motor energy to charge accumulators)

Download Competition Specs: https://uofi.box.com/shared/static/gst4s78tcdmfnwpjmf9hkvuzlu8jf771.pdf

Team using IQAN system (top right corner): https://engineering.purdue.edu/ABE/InfoFor/CurrentStudents/SeniorProjects/2012/GeskeLamneckSparenbergEtAl

Team using discrete logic (page 19): http://deepblue.lib.umich.edu/bitstream/handle/2027.42/86206/ME450?sequence=1