Topic 4: how do point defects diffuse?

Overview

Mass transport in solids, where different chemical species diffuse in a material due to random motion with or without a driving force, is a fundamental kinetic process for a wide variety of materials problems: growth of precipitates in nearly every advanced structural alloy from steels to superalloys, sintering of powders to make advanced ceramics, degradation of materials from irradiation, creep, recrystallization, corrosion, charge/discharge cycles in batteries, electromigration, and more. Fundamentally, all of the atomic-scale processes involved in mass transport require defects: interstitials for “small” impurity atoms, or vacancies and interstitials for substitutional solutes. The atomic-scale mechanisms can be very simple (site-to-site hopping for interstitial atoms) to increasingly complex mechanisms (vacancy-mediated to interstitialcy-mediated), and can be influenced by defect concentrations, temperature, strain, doping (!), and the presence of additional defects. The complexity of transport makes both experiments and modeling difficult, but the centrality to materials science and engineering provides a continuing driving force for its study. An entire course could be dedicated to this topic; here, we will consider a few of the defect specific aspects of diffusion applied to a relatively recent discovery: the “nano” Kirkendall effect.

Reading

For this topic, you will want to read the original discovery of the Kirkendall effect (a seminal result in diffusion, which took a long time to be accepted! See this history lesson), and a recent review paper covering some of the aspect of the application of the Kirkendall effect to the processing of nanoparticles. For the application part, you will also want to review results about diffusivity in semiconductors.

Team assignment

There has been more limited success in translating the use of the Kirkendall effect to making hollow semiconducting nanoparticles. Recent results have been shown for Si and Ge, but what if you wanted to making such nanostructures with compound semiconductors, like GaAs?

  1. Putting aside the issues of how you could synthesize your particular alloy, select a compound semiconductor and propose a possible approach to create a hollow nanoparticle.
  2. Does your selection require a solid solution before heating, or a core-shell design?
  3. Any other considerations for processing that you think could help your design?

Prelecture questions

  1. Diffusion mechanisms for solutes are sometimes inferred from the experimental activation barrier \(Q\) for diffusion, where \(D = D_0 \exp(-Q/k_\text{B}T)\). Briefly explain how you might decide what type of diffusion mechanism a species had, based on the diffusion barrier.
  2. Is it possible to get the Kirkendall effect if solutes diffuse via a different mechanism rather than vacancy-mediated diffusion? Justify your answer.
  3. If a solute B in matrix A can occupy both substitutional sites \(\text{B}_\text{A}\) and interstitial sites \(\text{B}_i\), then more complicated diffusion profiles are possible. Assume that the interstitial species is mobile, while the substitution is not. Consider the Frank-Turnbull mechanism, where an interstitial solute and a vacancy can combine to make a substitutional solute (and vice versa); if this reaction is in local equilibrium, vacancies are able to maintain global equilibrium, and \(\text{B}_i\) is a slower moving species than the vacancies, write the diffusivity of solute B in terms of defect concentrations and transport coefficients. Be sure to specify whether your concentrations are the local concentrations, or the thermodynamic equilibrium concentrations.

Suggested background

These may help you think about the papers and questions raised; you may want to look beyond these, too.

Note: If you are interested in more of the theory of mass transport, you should read Allnatt and Lidiard, Atomic Transport in Solids. (Cambridge Univ. Press, 1993) doi:10.1017/CBO9780511563904. This is the background reference for the theory of diffusion in solids. It has the two different (equivalent and related) approaches to understanding diffusion and goes from atomic-scale mechanisms to macroscale diffusion.


Discussion: Oct. 2-4, 2018