Project

# Title Team Members TA Documents Sponsor
28 BarPro Weightlifting Aid Device
Honorable Mention
 Grzegorz Gruba
Kevin Mienta
Patrick Fejkiel
 AJ Schroeder design_document1.pdf
design_document2.pdf
final_paper1.pdf
other1.pdf
other2.pdf
presentation1.pdf
proposal1.pdf
Patrick Fejkiel (pfejki2), Kevin Mienta (kmient2), Grzegorz Gruba (ggruba2)

Title: BarPro

Problem: Many beginner weightlifters struggle with keeping the barbell level during lifts. Even seasoned weightlifters find their barbells swaying to one side sometimes. During heavy lifts, many people also struggle with full movements after a few repetitions.

Solution Overview: BarPro is a device that straps on to a barbell and aids the lifter with keeping the barbell level, maintaining full repetitions and keeping track of reps/sets. It keeps track of the level of the barbell and notifies the lifter with a sound to correct the barbell positioning when not level. The lifter can use the device to calibrate their full movement of the repetition before adding weight so that when heavy weight is applied, the device will use data from the initial repetition to notify the lifter with a sound if they are not lifting or lowering the barbell all the way during their lift. There will be an LCD screen or LEDs showing the lifter the amount of repetitions/sets that they have completed.

Solution Components:
Subsystem #1 - Level Sensor: An accelerometer will be used to measure the level of the barbell. If an unlevel position is measured, a speaker will beep and notify the lifter.

Subsystem #2 - Full Repetition Sensor: An ultrasonic or infrared distance sensor will be used to measure the height of the barbell from the ground/body during repetitions. The sensor will first be calibrated by the lifter during a repetition with no weight, and then that calibration will be used to check if the lifter is having their barbell reach the calibrated maximum and minimum heights.

Subsystem #3 - LED/LCD Rep/Sets Indicator: LEDs or a LCD screen will be used to display the reps/sets from the data measured by the accelerometer.

Criterion for Success: Our device needs to be user friendly and easily attachable to the barbell. It needs to notify the lifter with sounds and LEDs/LCD display when their barbell is not level, when their movements are not fully complete, and the amount of reps/sets they have completed. The device needs to work smoothly, and testing/calibrating will need to be performed to determine the minimum/maximum values for level and movement positioning.

Electronic Mouse (Cat Toy)

Jack Casey, Chuangy Zhang, Yingyu Zhang

Electronic Mouse (Cat Toy)

Featured Project

# Electronic Mouse (Cat Toy)

# Team Members:

- Yingyu Zhang (yzhan290)

- Chuangy Zhang (czhan30)

- Jack (John) Casey (jpcasey2)

# Problem Components:

Keeping up with the high energy drive of some cats can often be overwhelming for owners who often choose these pets because of their low maintenance compared to other animals. There is an increasing number of cats being used for service and emotional support animals, and with this, there is a need for an interactive cat toy with greater accessibility.

1. Get cats the enrichment they need

1. Get cats to chase the “mouse” around

1. Get cats fascinated by the “mouse”

1. Keep cats busy

1. Fulfill the need for cats’ hunting behaviors

1. Interactive fun between the cat and cat owner

1. Solve the shortcomings of electronic-remote-control-mouses that are out in the market

## Comparison with existing products

- Hexbug Mouse Robotic Cat Toy: Battery endurance is very low; For hard floors only

- GiGwi Interactive Cat Toy Mouse: Does not work on the carpet; Not sensitive to cat touch; Battery endurance is very low; Can't control remotely

# Solution

A remote-controlled cat toy is a solution that allows more cat owners to get interactive playtime with their pets. With our design, there will be no need to get low to the ground to adjust it often as it will go over most floor surfaces and in any direction with help from a strong motor and servos that won’t break from wall or cat impact. To prevent damage to household objects it will have IR sensors and accelerometers for use in self-driving modes. The toy will be run and powered by a Bluetooth microcontroller and a strong rechargeable battery to ensure playtime for hours.

## Subsystem 1 - Infrared(IR) Sensors & Accelerometer sensor

- IR sensors work with radar technology and they both emit and receive Infrared radiation. This kind of sensor has been used widely to detect nearby objects. We will use the IR sensors to detect if the mouse is surrounded by any obstacles.

- An accelerometer sensor measures the acceleration of any object in its rest frame. This kind of sensor has been used widely to capture the intensity of physical activities. We will use this sensor to detect if cats are playing with the mouse.

## Subsystem 2 - Microcontroller(ESP32)

- ESP32 is a dual-core microcontroller with integrated Wi-Fi and Bluetooth. This MCU has 520 KB of SRAM, 34 programmable GPIOs, 802.11 Wi-Fi, Bluetooth v4.2, and much more. This powerful microcontroller enables us to develop more powerful software and hardware and provides a lot of flexibility compared to ATMegaxxx.

Components(TBD):

- Product: [https://www.digikey.com/en/products/detail/espressif-systems/ESP32-WROOM-32/8544298](url)

- Datasheet: [http://esp32.net](url)

## Subsystem 3 - App

- We will develop an App that can remotely control the mouse.

1. Control the mouse to either move forward, backward, left, or right.

1. Turn on / off / flashing the LED eyes of the mouse

1. keep the cat owner informed about the battery level of the mouse

1. Change “modes”: (a). keep running randomly without stopping; (b). the cat activates the mouse; (c). runs in cycles(runs, stops, runs, stops…) intermittently (mouse hesitates to get cat’s curiosity up); (d). Turn OFF (completely)

## Subsystem 4 - Motors and Servo

- To enable maneuverability in all directions, we are planning to use 1 servo and 2 motors to drive the robotic mouse. The servo is used to control the direction of the mouse. Wheels will be directly mounted onto motors via hubs.

Components(TBD):

- Metal Gear Motors: [https://www.adafruit.com/product/3802](url)

- L9110H H-Bridge Motor Driver: [https://www.adafruit.com/product/4489](url)

## Subsystem 5 - Power Management

- We are planning to use a high capacity (5 Ah - 10 Ah), 3.7 volts lithium polymer battery to enable the long-last usage of the robotic mouse. Also, we are using the USB lithium polymer ion charging circuit to charge the battery.

Components(TBD):

- Lithium Polymer Ion Battery: [https://www.adafruit.com/product/5035](url)

- USB Lithium Polymer Ion Charger: [https://www.adafruit.com/product/259](url)

# Criterion for Success

1. Can go on tile, wood, AND carpet and alternate

1. Has a charge that lasts more than 10 min

1. Is maneuverable in all directions(not just forward and backward)

1. Can be controlled via remote (App)

1. Has a “cat-attractor”(feathers, string, ribbon, inner catnip, etc.) either attached to it or drags it behind (attractive appearance for cats)

1. Retains signal for at least 15 ft away

1. Eyes flash

1. Goes dormant when caught/touched by the cats (or when it bumps into something), reactivates (and changes direction) after a certain amount of time

1. all the “modes” worked as intended

Project Videos