<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>
>VALUE
>VALUE
>VALUE
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
<b>SUPPLY SYMBOL</b>
<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
<b>Chip RESISTOR 0402 EIA (1005 Metric)</b>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 10 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 12 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 15mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 10mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 3.81 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 17.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0817, grid 22.5 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type 0817, grid 6.35 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type V234, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V235, grid 17.78 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm
>NAME
>VALUE
<b>Mini MELF 0102 Axial</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 7.5 mm
>NAME
>VALUE
0922
<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>RESISTOR</b><p>
type RDH, grid 15 mm
>NAME
>VALUE
RDH
<b>RESISTOR</b><p>
type 0204, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b> chip<p>
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC60<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR52<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR53<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR54<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR56<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Package 4527</b><p>
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>
Source: http://www.vishay.com .. dcrcw.pdf
>NAME
>VALUE
<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
>NAME
>VALUE
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b><p>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm
>NAME
>VALUE
<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>
Metric Code Size 1005
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>
Metric Code Size 1608
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>
Metric Code Size 3225
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>
Metric Code Size 4532
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>
Metric Code Size 4564
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650
>NAME
>VALUE
<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664
>NAME
>VALUE
Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf
>NAME
>VALUE
<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf
>NAME
>VALUE
<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf
>NAME
>VALUE
<b>CAPACITOR</b>
>NAME
>VALUE
Chip RESISTOR 0402 EIA (1005 Metric)
RESISTOR
RESISTOR
RESISTOR wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
RESISTOR wave soldering
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
RESISTOR
MELF 0.10 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.12 W
RESISTOR
MELF 0.10 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.12 W
RESISTOR
MELF 0.25 W
RESISTOR
type 0204, grid 5 mm
RESISTOR
type 0204, grid 7.5 mm
RESISTOR
type 0207, grid 10 mm
RESISTOR
type 0207, grid 12 mm
RESISTOR
type 0207, grid 15mm
RESISTOR
type 0207, grid 2.5 mm
RESISTOR
type 0207, grid 5 mm
RESISTOR
type 0207, grid 7.5 mm
RESISTOR
type 0309, grid 10mm
RESISTOR
type 0309, grid 12.5 mm
RESISTOR
type 0411, grid 12.5 mm
RESISTOR
type 0411, grid 15 mm
RESISTOR
type 0411, grid 3.81 mm
RESISTOR
type 0414, grid 15 mm
RESISTOR
type 0414, grid 5 mm
RESISTOR
type 0617, grid 17.5 mm
RESISTOR
type 0617, grid 22.5 mm
RESISTOR
type 0617, grid 5 mm
RESISTOR
type 0922, grid 22.5 mm
RESISTOR
type 0613, grid 5 mm
RESISTOR
type 0613, grid 15 mm
RESISTOR
type 0817, grid 22.5 mm
RESISTOR
type 0817, grid 6.35 mm
RESISTOR
type V234, grid 12.5 mm
RESISTOR
type V235, grid 17.78 mm
RESISTOR
type V526-0, grid 2.5 mm
Mini MELF 0102 Axial
RESISTOR
type 0922, grid 7.5 mm
CECC Size RC2211 Reflow Soldering
source Beyschlag
CECC Size RC2211 Wave Soldering
source Beyschlag
CECC Size RC3715 Reflow Soldering
source Beyschlag
CECC Size RC3715 Wave Soldering
source Beyschlag
CECC Size RC6123 Reflow Soldering
source Beyschlag
CECC Size RC6123 Wave Soldering
source Beyschlag
RESISTOR
type RDH, grid 15 mm
RESISTOR
type 0204, grid 2.5 mm
RESISTOR
type 0309, grid 2.5 mm
RESISTOR chip
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC55
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC60
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR52
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR53
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR54
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR55
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR56
Source: VISHAY .. vta56.pdf
Package 4527
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
CRCW1218 Thick Film, Rectangular Chip Resistors
Source: http://www.vishay.com .. dcrcw.pdf
Chip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
CAPACITOR
grid 2.5 mm, outline 2.4 x 4.4 mm
CAPACITOR
grid 2.5 mm, outline 2.5 x 5 mm
CAPACITOR
grid 2.5 mm, outline 3 x 5 mm
CAPACITOR
grid 2.5 mm, outline 4 x 5 mm
CAPACITOR
grid 2.5 mm, outline 5 x 5 mm
CAPACITOR
grid 2.5 mm, outline 6 x 5 mm
CAPACITOR
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm
CAPACITOR
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm
CAPACITOR
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm
CAPACITOR
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm
CAPACITOR
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 2.4 x 4.4 mm
CAPACITOR
grid 5 mm, outline 2.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 4.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 3 x 7.5 mm
CAPACITOR
grid 5 mm, outline 5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 5.5 x 7.5 mm
CAPACITOR
grid 5 mm, outline 7.5 x 7.5 mm
CAPACITOR
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm
CAPACITOR
grid 7.5 mm, outline 3.2 x 10.3 mm
CAPACITOR
grid 7.5 mm, outline 4.2 x 10.3 mm
CAPACITOR
grid 7.5 mm, outline 5.2 x 10.6 mm
CAPACITOR
grid 10.2 mm, outline 4.3 x 13.3 mm
CAPACITOR
grid 10.2 mm, outline 5.4 x 13.3 mm
CAPACITOR
grid 10.2 mm, outline 6.4 x 13.3 mm
CAPACITOR
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm
CAPACITOR
grid 15 mm, outline 5.4 x 18.3 mm
CAPACITOR
grid 15 mm, outline 6.4 x 18.3 mm
CAPACITOR
grid 15 mm, outline 7.2 x 18.3 mm
CAPACITOR
grid 15 mm, outline 8.4 x 18.3 mm
CAPACITOR
grid 15 mm, outline 9.1 x 18.2 mm
CAPACITOR
grid 22.5 mm, outline 6.2 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 7.4 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 8.7 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 10.8 x 26.8 mm
CAPACITOR
grid 22.5 mm, outline 11.3 x 26.8 mm
CAPACITOR
grid 27.5 mm, outline 9.3 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 11.3 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 13.4 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 20.5 x 31.6 mm
CAPACITOR
grid 32.5 mm, outline 13.7 x 37.4 mm
CAPACITOR
grid 32.5 mm, outline 16.2 x 37.4 mm
CAPACITOR
grid 32.5 mm, outline 18.2 x 37.4 mm
CAPACITOR
grid 37.5 mm, outline 19.2 x 41.8 mm
CAPACITOR
grid 37.5 mm, outline 20.3 x 41.8 mm
CAPACITOR
grid 5 mm, outline 3.5 x 7.5 mm
CAPACITOR
grid 37.5 mm, outline 15.5 x 41.8 mm
CAPACITOR
grid 7.5 mm, outline 6.3 x 10.6 mm
CAPACITOR
grid 27.5 mm, outline 15.4 x 31.6 mm
CAPACITOR
grid 27.5 mm, outline 17.3 x 31.6 mm
Ceramic Chip Capacitor KEMET 0204 reflow solder
Metric Code Size 1005
Ceramic Chip Capacitor KEMET 0603 reflow solder
Metric Code Size 1608
Ceramic Chip Capacitor KEMET 0805 reflow solder
Metric Code Size 2012
Ceramic Chip Capacitor KEMET 1206 reflow solder
Metric Code Size 3216
Ceramic Chip Capacitor KEMET 1210 reflow solder
Metric Code Size 3225
Ceramic Chip Capacitor KEMET 1812 reflow solder
Metric Code Size 4532
Ceramic Chip Capacitor KEMET 1825 reflow solder
Metric Code Size 4564
Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650
Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664
Source: http://www.avxcorp.com/docs/catalogs/cx5r.pdf
CAPACITOR
Source: AVX .. aphvc.pdf
CAPACITOR
Source: AVX .. aphvc.pdf
CAPACITOR
>NAME
>VALUE
>NAME
>VALUE
<B>RESISTOR</B>, American symbol
<B>CAPACITOR</B>, American symbol
<h3>SparkFun Switches, Buttons, Encoders</h3>
In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://spec_sheets.e-switch.com/specs/P010338.pdf">Dimensional Drawing</a></p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - PTH, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-5050)</p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/1101.pdf">Datasheet</a></p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.apem.com/files/apem/brochures/ADTS6-ADTSM-KTSC6.pdf">Datasheet</a> (ADTSM63NVTR)</p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - PTH, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SW016.JPG">Dimensional Drawing</a></p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - SMD, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://cdn.sparkfun.com/datasheets/Components/Switches/N301102.pdf">Datasheet</a></p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/Buttons/SMD-Button.pdf">Dimensional Drawing</a></p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - SMD, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.ck-components.com/media/1479/kmr2.pdf">Datasheet</a></p>
>Name
>Value
<h3>Momentary Switch (Pushbutton) - SPST - PTH, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SW016.JPG">Dimensional Drawing</a></p>
>Name
>Value
Foot
Feet
<h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
>NAME
>VALUE
<h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<h4>Variants</h4>
<h5>PTH-12MM - 12mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul>
<h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li>
<li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul>
<h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">
SparkFun BigTime Watch Kit</a></li></ul>
<h5>SMD-12MM - 12mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul>
<h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul>
<h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul>
<h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li>
<li>REDUNDANT package connects both switch circuits together</li></ul>
<h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul>
<h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li>
<li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul>
<h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel® Edison - Arduino</a></li></ul>
SSOP-20 package used for pic32mm
PIC32MM
O
<b>Small Outline Transistor</b><p>
package type OT
>NAME
>VALUE
PIC32 microcontroller
Texas Instruments LP5907MFX-3.3/NOPB linear regulator 3.3V 250mA SOT23-5L
LP5907 3.3 V
<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<map name="nav_main">
<area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title="">
<area shape="rect" coords="0,24,140,51" href="../about.asp" title="">
<area shape="rect" coords="1,52,140,77" href="../rfq.asp" title="">
<area shape="rect" coords="0,78,139,103" href="../products.asp" title="">
<area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title="">
<area shape="rect" coords="1,129,138,150" href="../edge.asp" title="">
<area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title="">
<area shape="rect" coords="0,179,139,201" href="../comments.asp" title="">
<area shape="rect" coords="1,203,138,231" href="../directory.asp" title="">
<area shape="default" nohref>
</map>
<html>
<title></title>
<LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css">
<body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0">
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%">
<tr valign="top">
</td>
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
</BODY></HTML>
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
wave soldering
>NAME
>VALUE
<b>RESISTOR</b><p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b> wave soldering<p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.10 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.12 W
>NAME
>VALUE
<b>RESISTOR</b><p>
MELF 0.25 W
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0204, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 10 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 12 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 15mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0207, grid 7.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 10mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0411, grid 3.81 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0414, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 17.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0617, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 22.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0613, grid 15 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0817, grid 22.5 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type 0817, grid 6.35 mm
>NAME
>VALUE
0817
<b>RESISTOR</b><p>
type V234, grid 12.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V235, grid 17.78 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm
>NAME
>VALUE
<b>Mini MELF 0102 Axial</b>
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0922, grid 7.5 mm
>NAME
>VALUE
0922
<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag
>NAME
>VALUE
<b>RESISTOR</b><p>
type RDH, grid 15 mm
>NAME
>VALUE
RDH
<b>RESISTOR</b><p>
type 0204, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b><p>
type 0309, grid 2.5 mm
>NAME
>VALUE
<b>RESISTOR</b> chip<p>
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC60<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR52<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR53<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR54<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR55<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR56<br>
Source: VISHAY .. vta56.pdf
>NAME
>VALUE
<b>Package 4527</b><p>
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf
>NAME
>VALUE
<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>
Source: http://www.vishay.com .. dcrcw.pdf
>NAME
>VALUE
<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
>NAME
>VALUE
>NAME
>VALUE
RESISTOR
RESISTOR
RESISTOR
RESISTOR wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
RESISTOR
wave soldering
RESISTOR
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
RESISTOR wave soldering
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf
RESISTOR
MELF 0.10 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.12 W
RESISTOR
MELF 0.10 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.25 W
RESISTOR
MELF 0.12 W
RESISTOR
MELF 0.25 W
RESISTOR
type 0204, grid 5 mm
RESISTOR
type 0204, grid 7.5 mm
RESISTOR
type 0207, grid 10 mm
RESISTOR
type 0207, grid 12 mm
RESISTOR
type 0207, grid 15mm
RESISTOR
type 0207, grid 2.5 mm
RESISTOR
type 0207, grid 5 mm
RESISTOR
type 0207, grid 7.5 mm
RESISTOR
type 0309, grid 10mm
RESISTOR
type 0309, grid 12.5 mm
RESISTOR
type 0411, grid 12.5 mm
RESISTOR
type 0411, grid 15 mm
RESISTOR
type 0411, grid 3.81 mm
RESISTOR
type 0414, grid 15 mm
RESISTOR
type 0414, grid 5 mm
RESISTOR
type 0617, grid 17.5 mm
RESISTOR
type 0617, grid 22.5 mm
RESISTOR
type 0617, grid 5 mm
RESISTOR
type 0922, grid 22.5 mm
RESISTOR
type 0613, grid 5 mm
RESISTOR
type 0613, grid 15 mm
RESISTOR
type 0817, grid 22.5 mm
RESISTOR
type 0817, grid 6.35 mm
RESISTOR
type V234, grid 12.5 mm
RESISTOR
type V235, grid 17.78 mm
RESISTOR
type V526-0, grid 2.5 mm
Mini MELF 0102 Axial
RESISTOR
type 0922, grid 7.5 mm
CECC Size RC2211 Reflow Soldering
source Beyschlag
CECC Size RC2211 Wave Soldering
source Beyschlag
CECC Size RC3715 Reflow Soldering
source Beyschlag
CECC Size RC3715 Wave Soldering
source Beyschlag
CECC Size RC6123 Reflow Soldering
source Beyschlag
CECC Size RC6123 Wave Soldering
source Beyschlag
RESISTOR
type RDH, grid 15 mm
RESISTOR
type 0204, grid 2.5 mm
RESISTOR
type 0309, grid 2.5 mm
RESISTOR chip
Source: http://www.vishay.com/docs/20008/dcrcw.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC55
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC60
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR52
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR53
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR54
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR55
Source: VISHAY .. vta56.pdf
Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR56
Source: VISHAY .. vta56.pdf
Package 4527
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf
CRCW1218 Thick Film, Rectangular Chip Resistors
Source: http://www.vishay.com .. dcrcw.pdf
Chip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf
>NAME
>VALUE
<B>RESISTOR</B>, American symbol
<b>Crystals and Crystal Resonators</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL RESONATOR</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>CRYSTAL</b>
>NAME
>VALUE
<b>Model 406 6.0x3.5mm Low Cost Surface Mount Crystal</b><p>
Source: 008-0260-0_E.pdf
>NAME
>VALUE
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL
CRYSTAL RESONATOR
CRYSTAL
CRYSTAL
Model 406 6.0x3.5mm Low Cost Surface Mount Crystal
Source: 008-0260-0_E.pdf
>NAME
>VALUE
1
2
<b>CRYSTAL</b>
<b>Jumpers</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>JUMPER</b>
>NAME
>VALUE
<b>JUMPER</b>
>NAME
1
2
3
>VALUE
<b>JUMPER</b>
>NAME
1
2
3
4
>VALUE
JUMPER
JUMPER
JUMPER
>NAME
>VALUE
>NAME
>VALUE
>NAME
>VALUE
<b>JUMPER</b>
<b>JUMPER</b>
<b>JUMPER</b>
<b>TTL Devices, 74xx Series with European Symbols</b><p>
Based on the following sources:
<ul>
<li>Texas Instruments <i>TTL Data Book</i> Volume 1, 1996.
<li>TTL Data Book, Volume 2 , 1993
<li>National Seminconductor Databook 1990, ALS/LS Logic
<li>ttl 74er digital data dictionary, ECA Electronic + Acustic GmbH, ISBN 3-88109-032-0
<li>http://icmaster.com/ViewCompare.asp
</ul>
<author>Created by librarian@cadsoft.de</author>
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Small Outline package</b> 150 mil
>VALUE
>NAME
<b>Leadless Chip Carrier</b><p> Ceramic Package
>NAME
>VALUE
Dual In Line Package
Small Outline package 150 mil
Leadless Chip Carrier Ceramic Package
>NAME
>VALUE
>NAME
GND
VCC
Hex schmitt trigger <b>INVERTER</b>
<h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.
<h3>Trimpot - PTH, Trimpot w/ finger-adjustable knob</h3>
<p><a href="https://www.sparkfun.com/products/9806">Trimpot 10K with Knob</a> (COM-09806)</p>
<p><a href="http://www.sparkfun.com/datasheets/Components/General/TSR-3386.pdf">Datasheet</a></p>
>Name
>Value
<h3>Trimpot - SMD, 5mm Square, Closed-Frame</h3>
<p>Used on e.g. <a href="https://www.sparkfun.com/products/13613">IOIO-OTG - V2.2</a></p>
<p><a href="http://www.vishay.com/docs/51008/ts53.pdf">Datasheet</a> (TS53YL502MR10)</p>
>Name
>Value
<h3>Trimpot - SMD, 3mm Square, Closed-Frame</h3>
<p>Used on e.g. <a href="https://www.sparkfun.com/products/12779">EasyDriver - Stepper Motor Driver</a></p>
<p><a href="http://www.bitechnologies.com/pdfs/22.pdf">Datasheet</a> (22AR10KTR)</p>
>Name
>Value
<h3>Bourns TC33X Trimpot - SMD, 3mm Square, Open-Frame</h3>
<p>Used on e.g. <a href="https://www.sparkfun.com/products/13899">Shapeoko</a></p>
<p><a href="http://www.bourns.com/docs/Product-Datasheets/TC33.pdf">Datasheet</a> (TS53YL502MR10)</p>
>NAME
>VALUE
<h3>Trimming Potentiometer (Trimpot)</h3>
<p>Three-terminal potentiometers, with an adjustable wiper and two adjustable resistors. A pot can be used to create a configurable voltage divider, or as a variable resistor.</p>
<p>"Trimpots" are a subset of potentiometers, usually intended for "set-and-forget" applications. They're often more delicate than standard potentiometers - rated for fewer turns.</p>
>NAME
>VALUE
<h3>Trimming Potentiometer (Trimpot)</h3>
<p>Three-terminal potentiometers, with an adjustable wiper and two adjustable resistors. A pot can be used to create a configurable voltage divider, or as a variable resistor.</p>
<p>"Trimpots" are a subset of potentiometers, usually intended for "set-and-forget" applications. They're often more delicate than standard potentiometers - rated for fewer turns.</p>
<h4>Variants</h4>
<h5>PTH-KNOB - PTH Trimpot w/ finger-adjustable knob</h5>
<ul><li><a href="https://www.sparkfun.com/products/9806">Trimpot 10K with Knob</a> (COM-09806)</li>
<li><a href="http://www.sparkfun.com/datasheets/Components/General/TSR-3386.pdf">Datasheet</a>
</ul>
<h5>SMD-3MM-CLOSED-FRAME - SMD 3mm Square Closed-Frame Trimpot</h5>
<ul><li>Used on e.g. <a href="https://www.sparkfun.com/products/12779">EasyDriver - Stepper Motor Driver</a></li>
<li><a href="http://www.bitechnologies.com/pdfs/22.pdf">Datasheet</a> (22AR10KTR)</li></ul>
<h5>SMD-5MM - SMD 5mm Square Closed-Frame Trimpot</h5>
<ul><li>Used on e.g. <a href="https://www.sparkfun.com/products/13613">IOIO-OTG - V2.2</a></li>
<li><a href="http://www.vishay.com/docs/51008/ts53.pdf">Datasheet</a> (TS53YL502MR10)</li></ul>
<h5>SMD-3MM-1/10W-25% - 3mm Square Open-Frame Trimpot</h5>
<ul><li>Used on e.g. <a href="https://www.sparkfun.com/products/13899">SparkFun Shapeoko</a></li>
<li><a href="http://www.bourns.com/docs/Product-Datasheets/TC33.pdf">Datasheet</a> (TC33X-2-103E)</li></ul>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.
Since Version 8.4, EAGLE supports properties for SPICE simulation.
Probes in schematics and SPICE mapping objects found in parts and library devices
will not be understood with this version. Update EAGLE to the latest version
for full support of SPICE simulation.